What is the most important reason for doing a vehicle inspection? Safety is the most important reason you inspect your vehicle, safety for yourself and other road users.
People also ask, what is the most important reason to inspect your truck or bus?
You are checking your steering and exhaust system in a pre-trip inspection.
Subsequently, question is, what are some things you should check on the front of your vehicle when doing a walk around inspection? Name some things you should check on the front of your vehicle during the walk-around inspection.
- Go to front of vehicle and check that low beams are on and both of the 4-way flashers are working.
- Push dimmer switch and check that high beams work.
- Turn off headlights and 4-way, hazard warning flashers.
Similarly, why put the starter switch key in your pocket during the Vehicle Inspection?
Question: For what reason do you keep the starter switch key in your pocket during the pre-trip inspection? Answer: So no one moves the vehicle while you are inspecting underneath it. Question: When the road is slippery, retarders will help keep you from skidding.
Why should you back toward the driver's side?
Back to the driver's side so you can see better. Backing toward the right side is very dangerous because you can't see as well. If you back and turn toward the driver's side, you can watch the rear of your vehicle by looking out the side window.
How can you start moving without rolling backward?
If stopped on a hill, how can you start moving without rolling back? partly engage the clutch before you take your right foot off the brake. Release the parking brake with enough engine power. the hand valve can be applied to keep from rolling back.What are the three types of emergency equipment?
What three kinds of emergency equipment must you have? Spare electrical fuses, three red reflective triangles, properly charged and rated fire extinguisher.How many red reflective triangles should you carry?
Preview Flashcards| Front | Back |
|---|---|
| How many red reflective triangles should you carry? | 3 |
| How do you test hydraulic brakes for leaks? | Pump the brake pedal three times, apply firm pressure, hold for five seconds. The pedal should not move. |
| Why put the starter switch key in your pocket during the pre-trip inspection? | For your safety |
What effects can wet brakes cause?
When driving in heavy rain or deep standing water, your brakes will get wet. Water in the brakes can cause the brakes to be weak, to apply unevenly, or to grab. This can cause lack of braking power, wheel lockups, pulling to one side or the other, and jackknife if you pull a trailer.Why should you limit the use of your horn?
You should limit the use of your horn because it can startle other drivers.When should stab braking never be used?
Stab braking is used on cars without ABS brakes and it consists of these steps: Applying the brakes all the way. Releasing the brakes when the wheels lock up. As soon as the wheels start rolling, put on the brakes fully again.What is emergency braking?
Definition of emergency brake. : a brake (as on an automobile) that can be used for stopping in the event of failure of the main brakes and to keep the vehicle from rolling when parked.What's the most important way to see the sides and rear of your vehicle?
Traffic and road conditions. What's your most important way to see the sides and rear of your vehicle? Checking mirrors regularly.Do retarders keep you from skidding?
A: Use this engine braking when going down grades. Q: Retarders keep you from skidding when the road is slippery. Your wheel may skid when roads are wet.Can you bring the vehicle inspection memory aid with?
Can you bring the "vehicle inspection memory aid" with you to the test? No. You either know it or you don't.What are some of the advantages of going right instead of left around an obstacle?
What are some advantages of going right instead of left around an obstacle? If an oncoming driver has drifted into your lane, a move to your right is best. At least you won't force anyone into an opposing traffic lane and a possible head-on collision.Should you use low beams whenever you can?
Make sure they will fit your drive tires. You should use low beams whenever you can. Avoid driving through puddle or flowing water. You should let air out of hot tires so the pressure goes back to normal.What should the wheel bearing seals be checked for?
The wheel bearing seals must be checked for the possibility of any oil leaks. This might signify one or a range of problems that will affect the safe driving of the vehicle. There should be no sign of leaks on the wheel bearing seals, not even a drop.How do you find out how many seconds of following distance space you have?
How do you find out how many seconds of following distance space you have? Wait until the vehicle ahead passes a shadow on the road, a pavement marking, or some other clear landmark. Then count the seconds that pass until you reach the same point.What three things add up to total stopping distance?
What three things add up to total stopping distance? Perception Distance + Reaction Distance + Braking Distance.What is the best way to see the sides and rear of your vehicle CDL?
Continuing Education Commercial Driving- Regularly looking out the window and checking behind you.
- Checking your mirrors regularly and more often in special situations.
- Installing a rear camera system is the safest way to see sides of your vehicle.
- Using a passenger to look out the windows and check the mirrors for you.
