What is best height for chair rail with 9 ceilings?

off the floor. In fact, in rooms with 9-ft. to 10-ft. ceilings, this height is actually most appropriate for chair rail, and best falls within the rules of classical architecture (see photo, right).

Likewise, people ask, how high do you put chair rail?

“About 28 to 32 inches is an optimum range for chair rail height,” says Hull. “Lower is always better than higher. For me, a good rule of thumb is to install chair rail molding at 25% of the height of the room. In a room with a 10-foot-high ceiling, the chair rail should be 30 inches off the floor.

Subsequently, question is, what is the difference between wainscoting and chair rail? First, the difference between "panel molding" and "wainscoting." Wainscoting is a TYPE of panel molding and it signifies a decorative wooden treatment that is usually at chair rail height (approximately 32″ above the floor) or below. Wainscoting is usually a complete piece of paneling (usually wood).

Secondly, which side is up on chair rail?

The general rule is that the chair rail should be about 1/3 of the way up from the floor (between 32" and 36" for an 8' ceiling).

What is the purpose of a chair rail?

Chair rails are horizontal moldings applied to walls designed to protect them from “irrationally exuberant” chairs on the move. Chair rails also serve to cleanly define space so you can apply different wall treatments—wallpaper, paint, wainscoting—to the upper and lower sections of a wall.

Are chair rails out of style?

Chair Rails: Not Just For Historic Homes As plaster walls turned into wallboard and formal dining rooms lost their popularity, so too did chair rails fade from prominence. Chair rail molding is easy to install, and there are many styles to choose from.

Does chair rail add value?

Unique Trim Styles to Add Value to Your Home If you're looking for more decorative trim, consider these fashionable and unique styles. Chair rail. This trim goes around the bottom third of the wall and protects the wall from furniture damage. It also adds decorative effect and adds more dimension to the wall.

Does chair rail have to match baseboards?

The simplest way to do this is to match your chair rail to the baseboards and any other trim work, including crown molding. This holds the room's design together and allows you to be creative with your wall color. Paint the walls a uniform color, or use different hues above and below the chair rail.

How do I keep my chair from hitting the wall?

Cover-up Chairs An easy and simple solution to keep chairs from scratching your dining room walls is to cover them with slipcovers. Slipcovers soften the contact to your walls, and, if the chairs hit the wall, create minimal buffs or marks.

What is the proper height for wainscoting?

The traditional rule of thumb is that wainscoting height should be a third of the wall's height, including the cap or any moldings. So if you have 9-foot walls, then 3-foot (or 36-inch) wainscoting will look great. Scale down to about 32 inches for rooms with 8-foot walls.

Is there a difference between wainscoting and beadboard?

Wainscoting refers to a decorative wall treatment that covers the lower three or four feet of an interior wall. You can use almost any material to wainscot a wall, including wood, tile, plaster, marble or paint. Beadboard is one of the many wood options that you can choose to wainscot your wall.

What is a high chair rail called?

A dado rail, also known as a chair rail or surbase, is a type of moulding fixed horizontally to the wall around the perimeter of a room.

How do you deal with an inside corner?

Cope straight with a miter saw Cut the 'straightaway' with a miter saw for a faster, straighter cope. Turn the molding upside down, set your saw at least 5 degrees to the right and cut straight down until you hit the curvy part. Some pros even nibble away at curved profiles with a miter saw.

How much does it cost to install chair rail?

Cost to Install Chair Rail Molding

Chair Rail Molding Costs	Zip Code
Basic	Best
Chair Rail Molding – Installation Cost	$270.00 - $292.50	$345.00 - $382.50
Chair Rail Molding – Total	$465.00 - $517.50	$637.50 - $727.50
Chair Rail Molding – Total Average Cost per lineal Ft.	$3.27	$4.55

Can you glue chair rail to the wall?

Apply a continuous bead of construction adhesive to the back of the chair rail, then align the bottom of the molding with your level line on the wall. Use a pneumatic nailer or hammer with 2-1/2 inch finishing nails to attach the chair rail to the wall (image 6).

How do you attach a chair rail to a plaster wall?

Apply a bead of construction adhesive to the back of wooden chair rail molding. Add polyurethane adhesive caulk to urethane molding. Put the molding back in place along the chalk line. Secure the molding to the wall with finishing nails through the pilot holes.

Does wainscoting make a room look bigger or smaller?

Higher wainscoting, particularly if the ceilings are low, will make the rooms feel smaller. Moreover, dark-colored wainscoting will make the rooms feel smaller. If you want to use wainscoting to make the rooms feel larger, you should go for shorter ones with lighter colors.

Should you paint wainscoting same color as wall?

Using the same color paint on the wainscoting and the wall in different shades will make the room look larger. If you want to make a statement and add weight to the room, paint the wainscoting a dark color and the walls a lighter color. If you have many colorful items in your room that pop, pick neutral paint colors.

What color should chair rail be?

It is best to paint the lighter or warmer color on the upper portion of the wall to create a more open feel to the room. The chair rail and other trim should be painted in a neutral or light complementary color.

What is the purpose of wainscoting?

Wainscoting may also refer to other materials used in a similar fashion. The original purpose of wainscoting was to cover the lower part of walls, which, in houses constructed with poor or non-existent damp-proof courses, are often affected by rising dampness. Its purpose is now decorative.

Is beadboard in style?

Beadboard is a traditional style of wall paneling that is made of evenly spaced interlocking tongue and groove wood elements. Today, it is installed as a decorative feature to walls, ceiling, cabinetry and even furniture to add an antique cottage look. It's also available in premade sheets or even wallpaper.

Is wainscoting expensive?

Wainscoting can be as cheap as $1 per square foot if using MDF or plywood, or more than $40 per square foot if using an expensive solid wood. Real wooden beadboard paneling costs $1 per square foot. Imitation types cost $0.50 to $0.75 per square foot. Wainscoting and beadboard are only as expensive as you make it.