What is a break view?

You can use a break (or interrupted) view in a drawing. Break views make it possible to display the drawing view in a larger scale on a smaller size drawing sheet. These dimensions are only for use in the drawing document and do not appear on a printed drawing.

Regarding this, how do you break View in Solidworks?

Creating a Break View

1. Select a drawing view and click Break. (Drawing toolbar) or click Insert > Drawing View > Break.
2. Set options in the PropertyManager: Option.
3. Click in the view twice to place two break lines, creating the break. The view is displayed with a gap in the geometry.
4. Add additional break lines as necessary.
5. Click .

Beside above, how do I create a detail view in Solidworks? To create a detail view:

1. Click Detail View. (Drawing toolbar), or click Insert > Drawing View > Detail.
2. The Detail View PropertyManager appears and the Circle tool. is active.
3. Sketch a circle.
4. When the view is where you want it to be, click to place the view.

Accordingly, how do you crop in Solidworks?

To crop a view:

1. In a drawing view, sketch a closed profile such as a circle.
2. Click Crop View. (Drawing toolbar), or click Insert > Drawing View > Crop. The view outside the profile disappears. A circle is drawn on this Section View. After cropping, only the view inside the circle is displayed.

How do you make an auxiliary view in Solidworks?

To create an auxiliary view:

1. Click Auxiliary View. (Drawing toolbar), or click Insert > Drawing View > Auxiliary.
2. Select a reference edge (not a horizontal or vertical edge, which would create a standard Projection View).
3. Move the pointer until the view is where you want, then click to place the view.

How do you break links in Solidworks drawing?

To break the link from the original part file:

1. In the FeatureManager design tree, right-click the inserted third-party native CAD file and click Break Link.
2. In the dialog box, click one of the following: Yes, break the link (cannot be undone) . Breaks the link of the inserted part file from the original file.

How do you break a dimension line in Solidworks drawing?

On the Leaders tab of the respective PropertyManager, under Break Lines:

1. Select Break extension lines to break extension lines around dimension lines and other extension lines.
2. Select Break dimension line to break the dimension line around other dimension lines and other extension lines.

How do I crop a view?

To create a crop view with no outline:

1. In a drawing view, sketch a closed sketch profile, such as a circle.
2. Select the circle.
3. Click Crop View (Drawing toolbar) or Insert > Drawing View > Crop.
4. Select the drawing view.
5. In the PropertyManager, under Crop View, select No outline.
6. Click .

What is a projected view?

Projected views are created by folding off an existing view in one of eight possible projections. The Front view is a model view and the other two views are projected views, using First angle or Third angle projection as specified in Sheet Properties.

What is a aligned section view in SolidWorks?

Aligned Section View. You can create an aligned section view in a drawing through a model, or portion of a model, that is aligned with a selected section line segment. The aligned section view is similar to a Section View , but the section line for an aligned section comprises two or more lines connected at an angle.

How do I resize a view in SolidWorks?

Scales in Drawings

1. To set the scale of an existing drawing sheet, do one of the following: In the status bar click Sheet Scale and click a scale.
2. To set the scale of a drawing view, do one of the following: For existing drawing views, select a view or views, then set the Scale in the PropertyManager.

What is a detail view?

A detail view is a view of the model that appears as a callout or section in other views. This type of view typically represents the model at finer scales of detail than in the parent view.

How do you move a section view in Solidworks?

Inserting a Section View

1. In a drawing view, click Section View (Drawing toolbar) or Insert > Drawing View > Section.
2. In the Section View PropertyManager, click Section.
3. In Cutting Line, select Auto-start section view.
4. Click Vertical and move the cutting line to the location and click.

What is a detail view in Solidworks?

Detail View. You create a detail view in a drawing to show a portion of a view, usually at an enlarged scale.

How do I change a border in Solidworks?

To use the Automatic Border tool:

1. In a drawing, click Edit Sheet Format (Sheet Format toolbar).
2. Click Automatic Border (Sheet Format toolbar).
3. Set options: On the first page of the Automatic Border PropertyManager, select items to delete from the sheet's format.
4. Click .

What is an auxiliary view used for?

SUMMARY ? Auxiliary views are a type of orthographic projection used to determine the true size and shape of inclined and oblique surfaces of objects. ? Normally, auxiliary views are projected from existing principal views. ? However, auxiliary views can also be drawn first and then used to create a principal view.

How do I create an auxiliary view?

To create an auxiliary view:

1. Click Auxiliary View. (Drawing toolbar), or click Insert > Drawing View > Auxiliary.
2. Select a reference edge (not a horizontal or vertical edge, which would create a standard Projection View).
3. Move the pointer until the view is where you want, then click to place the view.

What is an auxiliary view in Solidworks?

An Auxiliary View is similar to a Projected View, but it is unfolded normal to a reference edge in an existing view. You can create an auxiliary view of an exploded assembly view. You can use sketched lines for folding.

How do you add arrows in Solidworks drawings?

Draw Arrows in SOLIDWORKS This command can be found from Insert > Annotation > Multi-jog Leader. This command works very similar to the Line command. The default for the command is to continue adding lines until it is selected to end. To end the line you either double-click or righ-click and select end leader.