It cost us just under $2900 for the fire including plinth and flue kit and they charged approx $500 for installation!Besides, what is a jetmaster?
Jetmaster - Wood, Multifuel & Gas Fireplaces & Stoves - Designed for Living! Firstly, from radiated heat off the fireplace itself and secondly, heat from the air that is heated as it travels through the convection chamber. Jetmaster has a no smoke guarantee.
Secondly, how do open fireplaces work? A fireplace creates a column of heated gas inside the chimney. As that air rises, more heated air from the fire is pulled after it. The result is a draft -- a steady flow of smoke and hot gases -- up the chimney. As the hot gas rises, it pulls fresh air into the pile of burning fuel.
People also ask, can you convert a wood fireplace to a gas fireplace?
Wood-burning fireplaces can easily be converted to gas. Consider these options. If you have a standard masonry-built wood-burning fireplace, you have three options: Have a direct vent gas insert installed.
How do fireplace dampers work?
Fireplace damper position For a fire to ignite, it needs oxygen. By opening the fireplace damper, you'll be allowing air to get in the chimney so that the fire can start. With the damper open, the fire will continue to build, and allow smoke, soot and other contaminants to vent through the chimney.
How do you light a jetmaster gas fire?
Remember to shut the gas supply valve off (picture #1). If it remains lit, press the valve knob in slightly and rotate counter- clockwise until the word "ON" is in the 6 o'clock position. Finally, turn the unit's ON/OFF switch (or wall switch or remote control) to the "ON" position to start your fire.Does a gas fireplace increase home value?
Most agreed that a fireplace does indeed increase a home's value. Almost 70 percent of the agents say they see some kind of value increase if a home contains a fireplace. When asked about which kinds of fireplaces homebuyers preferred, the majority say gas-burning fireplaces.Do you need a chimney for a gas fireplace?
Ventless fireplaces fueled by gas or propane rely on indoor air for combustion, and they exhaust a low level of their combustion gases into the room in which they're located. A chimney or flue isn't necessary. The risk to your health is a long-standing and ongoing debate.Are gas fireplaces better than wood?
Pros Gas Fireplaces Clean Burning – Both natural gas and propane are relatively clean burning fuels. That means gas fireplaces are better for the environment than wood-burning alternatives. No Chimney Needed – Because gas fireplaces burn cleanly, there is no need to have a chimney.How hard is it to convert a wood fireplace to gas?
Costs to convert wood fireplace to gas Installing a gas line and either vented or vent-free gas logs will cost from $500 to $2,500. (Note that the cost of installing vent-free gas logs is often about $200 more than the cost for vented.) Gas inserts cost $2,000 to $5,500.What kind of wood do you use for a gas fireplace?
If the fireplace is built to proper dimensions, the heat source (firewood or gas) should be recessed enough that any type wood could be used. Pine or poplar if you are going to paint it. If not pick a wood that goes with the existing look of the room.Are gas fireplaces safe?
Gas fireplaces are safe. But as with all gas appliances, they do produce carbon monoxide. If something goes wrong, carbon monoxide put the home's occupants at risk. Therefore, carbon monoxide detectors are a critical part of gas fireplace safety, even if you don't use the fireplace often.How much does it cost to change a gas fireplace to wood burning?
It costs $100 to $300 to convert a gas fireplace to wood. Switching a wood fireplace to a gas insert is $2,280 to $4,030 because a flue has to be built and a gas line installed. A ventless gas fireplace will cost about $1,200 less to install.What happens if you burn wood in a gas fireplace?
Burning wood in a gas fireplace will cause at least three bad things to happen. The heat will destroy the internal components of the gas fireplace. The smoke produced will not exit the undersized vent system, and fill the home with carbon monoxide and other undesirables.What is the average cost of installing a gas fireplace?
The average costs associated with installing a gas fireplace include $600 for the firebox installation, $750 for the vent pipe, $2,750 for the full installation and finishing work, and between $150 and $800 for the gas line, depending on how far it needs to run. 
