Besides, what is a halyard on a ladder?
FLY - The extendable and retractable section or sections of an extension ladder. GUIDES - The metal strips on an extension ladder which guide the fly section or sections while being extended or retracted. HALYARD - The rope used to extend or retract the fly.
Furthermore, what is the OSHA standard for ladders? The minimum clear distance between side rails for all portable ladders must be 11.5 inches (29 cm). edge of a landing area must be no less than 7 inches (18 cm) and no more than 12 inches (30 cm). A landing platform must be provided if the step-across distance exceeds 12 inches (30 cm).
Also to know, what does a bowline knot look like?
The bowline is used to make a loop at one end of a line. It is tied with the rope's working end also known as the "tail" or "end". The loop may pass around or through an object during the making of the knot. The knot tightens when loaded at (pulled by) the standing part of the line.
How do you tie two ropes together?
Lay the ends of two lines parallel to each other. Coil the free end of one rope twice around the second rope and pass it back through the inside of the coils. Repeat with second rope in opposite direction . Pull free ends to tighten knots, then standing lines to slide knots together.
How do you tie a rope to a cleat?
Cleat Hitch Knot Tying Instructions- Take a turn around the base of the cleat, and then bring the line over the top of the cleat.
- Wrap the line back under the arm of the cleat opposite the first turn, then back over the top of the cleat.
- Wrap under the first arm a 2nd time and then back over the top of the cleat.
