- Verify and make sure the ignition is switched OFF.
- Connect the 2 pins in the MES with a paper clip or metal object.
- Turn the ignition switch ON.
- The SRS Indicator Light should come on for 6 seconds and then go off.
- The SRS Indicator Light should come back on agian.
- The SRS light should go off.
Similarly, you may ask, what does the SRS light mean on a 2000 Honda Accord?
The SRS light is a warning light for your supplemental restraint system (airbags). An SRS light means that there is a problem in the system. The first thing I would check is the fuse for the SRS unit. The only way to check this is with a scan tool of some sort.
Likewise, how do I turn off the SRS light? How to Reset an Airbag Light
- Put the key into the ignition and turn the switch to the "on" position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times. Start the engine.
Also to know is, how do you reset the SRS light on a Honda Accord?
How to Reset a Honda Accord SRS Light
- Straighten out a paperclip.
- Pull down on the fuse panel cover under the steering column with your fingers to remove it.
- Locate the small yellow plug in the fuse panel.
- Unplug the power connector from the fuse panel.
What causes SRS light to stay on?
If the SRS light stays on or starts flashing on and off, you may have a problem with the airbags themselves, a loose wire, a faulty seat belt buckle, or a problem with the Engine Control Unit (ECU) that is causing the airbag warning light to stay on.
Can you drive with the SRS light on?
Is it safe to drive with an SRS light on? It doesn't necessarily mean that the car isn't safe to drive but it's like playing with fire if you do. When this light is on it means your safety system isn't working at 100% and in some cases, it could mean that your airbags are disabled and will not deploy in an accident.Can airbag light be reset?
There are also some car models that allow simple resetting of the airbags, as long as they aren't damaged, of course. Basically, resetting an airbag means putting it back inside its module and resetting the airbag light. Just like your seat belt, a fully functioning airbag can help save your life too.How much does it cost to fix an SRS light?
Cost To Fix Airbag Light. The average cost to replace your airbag on your vehicle will vary determine on your vehicle manufacturer and if you plan on replacing the airbag yourself. Some airbags may only cost $100 to $300 for the airbag itself, but you will likely be charged $1000 to have the airbag by a mechanic.What does SRS mean in Honda?
supplemental restraint systemWhy is the SRS light on in my 2002 Honda Accord?
The supplemental restraint system (SRS) light should come on momentarily when the ignition is turned on. It should then go out. If the light stays on continuously, there is a problem in the SRS system. The cause of the light could be anything from a failed clockspring to a faulty control module.What would cause the SRS light to come on?
What causes the air bag light to come on? The air bag or SRS light, as well as several other dashboard lights, briefly appear when a vehicle is started β which allows the system to self-test. It could refer to a problem with the seat belt system, the air bag, the computer or associated wiring.Is it safe to drive with the SRS light on?
It is not safe to drive with the airbag light ON. When there is a problem with the system, it will not deploy the airbags at all in an accident. It is always recommended to repair the problem as soon as possible. If your airbags are not functional in a crash, it may cause death or serious injuries.Why did my SRS light came on?
The car's onboard computer will turn on the Supplemental Restraint System (SRS) Warning Light if the system will not operate properly or operate outside of intentions. This system is designed to deploy air bags and tighten seat belts when the computer determines the car is in an accident.What does SRS stand for?
Supplemental Restraint SystemWhat is a SRS light?
SRS stands for Supplemental Restraint System, and it has to do with the airbags in your car. If the SRS light is on while you are driving, it means that there is an issue with the car's airbag system and it also means that the airbags will not deploy if you are in an accident.Will your car pass inspection with airbag light on?
There is no criteria in the inspection regulations that requires the Supplemental Restraint System or airbag be in proper working order for annual safety inspection. Therefore a vehicle does not fail inspection for having an air bag warning light illuminated or even for having an air bag removed.How do you reset the SRS light on a 1997 Honda Accord?
96 Accord SRS light reset instructions- Turn the ignition switch OFF, and wait for ten seconds.
- Connect the SCS service connector to the MES connector.
- Turn the ignition switch ON (II).
- The SRS indicator light comes on for about six seconds.
- The SRS indicator light comes on again.
- The SRS indicator light goes off.
Why is the SRS light on Honda Civic?
What is the SRS light on the Honda Civic? The SRS warning stands for Supplemental Restraint System. It supplements the primary restraint system, the seatbelts. This light indicates that a fault has been detected and the airbags may not deploy or deploy properly in an accident.How do I turn off the SRS light on my Honda CRV?
Take care not to touch the exposed wire with any part of your body. 4 Put the key in the ignition and turn it on, but don't start the engine. Keep the ends of the wire touching while you do this. The SRS light will flash on, and then disappear.What is Mercedes restraint malfunction?
SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system.How do you reset the SRS light on a 2001 Honda Civic?
Reset Your SRS Light- There is a yellow plug under the dash plugged into the fuse panel. It has two wires going into it.
- Turn the ignition key to the βONβ (II) position.
- When the SRS light comes back on plug the jumper wire back in within 4 seconds the light will blink twice and go out.
- Unplug the jumper and turn the ignition key off.