How do you reset the oil light on a Hyundai Tucson?

ignition on top right steering wheel push the menu button until you reach the service reminder push OK button and hold light will reset .

Also asked, how do you reset the oil light on a 2016 Hyundai Tucson?

2016-2020 Hyundai Tucson Service Required Indicator Light Reset:

  1. When you turn on the engine and see “Service required” on the screen, press the OK button located at the steering wheel for more than 1 second.
  2. To access the SERVICE INTERVAL menu, press the MODE button (icon rectangle) on the steering wheel and highlight the USER SETTINGS MODE and then press OK button.

Also, how do I check the oil life on my 2019 Hyundai Tucson?

  1. Getting Started.
  2. Open the Hood.
  3. Remove Dipstick. Locate, remove and wipe oil dipstick.
  4. Read Oil Level. Reinsert dipstick, remove and then read oil level.
  5. More Info. Additional information on the oil level. Checking the oil in a Tucson is fairly easy and should be done once a month.

Also to know, how do you reset the oil light on a Hyundai?

You can clear or reset this oil change light using the following steps.

  1. Start the vehicle.
  2. Press and hold the “OK” button for 5 seconds.
  3. Release the “OK” button, then press and hold it again for 1 second. The oil change light will then reset.

How do you reset the low tire pressure light on a Hyundai Tucson?

Without starting the car, turn the key to the “On” position. Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes to reset the sensor. You'll usually find the tire pressure monitor reset button beneath the steering wheel.

How do you reset the tire pressure light on a Hyundai Tucson?

How to Reset a Hyundai Tire Pressure Monitor
  1. Park the Hyundai on a level surface.
  2. Remove the valve cap of the tire that was indicated as being low on air.
  3. Press the end of the pressure gauge into the nozzle to measure the current air pressure.
  4. Press the end of the compressed air hose into the valve for a few seconds to add air to the tire.

How do you reset the oil life on a 2011 Hyundai Sonata?

Hyundai Sonata — Reset “Service Required” Light
  1. Start the engine.
  2. Press and hold the “OK” button located on the top right of the steering wheel for about 3 seconds.

How do you reset the oil light on a 2013 Hyundai Veloster?

Indicator oil life reset light service Hyundai Veloster
  1. Turn the ignition to position On without starting the engine.
  2. Press and hold the TRIP button until you enter to “User Setting” mode.
  3. Select “Maintenance” by pressing the RESET button.
  4. Select the desired maintenance schedule by pressing TRIP button to move and RESET button to select.

How do you reset the oil light on a 2016 Hyundai Accent?

Perform the following step to reset service light on your Hyundai:
  1. When you turn on the engine and see “Service required” on the screen, press the OK button located at the steering wheel for more than 5 seconds.
  2. Then when the miles and days blink press the OK button for more than 1 second.

How do you check the oil on a 2016 Hyundai Sonata?

  1. Getting Started.
  2. Open the Hood.
  3. Remove Dipstick. Locate, remove and wipe oil dipstick.
  4. Read Oil Level. Reinsert dipstick, remove and then read oil level.
  5. More Info. Additional information on the oil level. Checking the oil in a Sonata is fairly easy and should be done once a month.

What does service in off mean?

Service in OFF. If the service interval is not set, “Service in OFF” message is displayed on the LCD display. ✽ NOTICE. If any of the following conditions occurs, the mileage and days may be incorrect. - The battery cable is disconnected.

How do you reset the service interval on a 2016 Hyundai Santa Fe?

Press the MODE button (rectangle icons) on the bottom right of the steering wheel to highlight the INFORMATION menu. Press the SELECT/RESET button to access the menu and use the DOWN arrow to turn the SERVICE INTERVAL mode on and set the applicable interval.

How do you turn on the service interval on a Hyundai Elantra?

When you turn on the engine and see “Service required” on the screen, press the OK button located at the steering wheel for more than 1 second. With this, the service interval will be reset to default settings. But you have to activate and set the service interval feature by accessing the “Service Interval” menu.

How do you reset the oil life on a 2014 Hyundai Sonata?

Perform the following step to reset service light on your Hyundai Sonata: When you turn on the engine and see “Service required” on the screen, press the OK button located at the steering wheel for more than 1 second. With this, the service interval will be reset to default settings.

How do you reset the service light on a 2013 Hyundai Santa Fe?

How To Reset Hyundai Santa Fe Service Required Light (2013-2015):
  1. Turn the ignition key to position “ON” without starting the engine, If your Hyundai Santa Fe has Smart key button, press the “Start” button twice without touching the brake pedal.
  2. Press the MODE button on the steering wheel to highlight the SERVICE menu.

You Might Also Like