How do you reset the oil life on a 2017 Hyundai Sonata?

Press the MODE button (rectangle icons) on the top right of the steering wheel to highlight the INFORMATION menu. Press the OK button to access the menu and use the directional keypad to turn the SERVICE INTERVAL mode on and set the applicable interval.

Consequently, how do you reset the oil light on a 2017 Hyundai Sonata?

2016-2018 Hyundai Sonata Service Required Minder Light Reset:

  1. Use the navigation button and find the “Service Required“, and then press and hold the OK button for more than 2 seconds.
  2. Turn the ignition off and then start the engine to verify the indicator has been reset.

Additionally, what does it mean service interval off? If the service interval is not set, "Service interval OFF" message is displayed on the LCD display. ✽ NOTICE. If any of the following conditions occurs, the mileage and days may be incorrect. The battery cable is disconnected.

Keeping this in consideration, how do you reset the oil life on a Hyundai?

You can clear or reset this oil change light using the following steps.

  1. Start the vehicle.
  2. Press and hold the “OK” button for 5 seconds.
  3. Release the “OK” button, then press and hold it again for 1 second. The oil change light will then reset.

What does triangle with exclamation point mean on Hyundai?

Yellow triangle with exclamation point inside, means low windshield wiper fluid.

What is service interval off Hyundai?

Service in OFF. If the service interval is not set, “Service in OFF” message is displayed on the LCD display. ✽ NOTICE. If any of the following conditions occurs, the mileage and days may be incorrect. - The battery cable is disconnected.

How do you reset the maintenance light on a 2016 Hyundai Santa Fe?

2016-2018 Hyundai Santa Fe Service Required Light Reset:
  1. Turn the ignition to ON position without starting the engine.
  2. Press the (MODE button) on the steering wheel until you get to the menu tab.
  3. Use the ∇ button and find the “Service Required“, and then press the button for more than 2 seconds.

How do you reset the tire pressure light on a 2017 Hyundai Elantra?

Without starting the car, turn the key to the “On” position. Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes to reset the sensor. You'll usually find the tire pressure monitor reset button beneath the steering wheel.

How do you reset the oil life on a 2012 Hyundai Sonata?

Perform the following step to reset service light on your Hyundai Sonata: When you turn on the engine and see “Service required” on the screen, press the OK button located at the steering wheel for more than 1 second. With this, the service interval will be reset to default settings.

How do you reset the maintenance required light on a 2012 Hyundai Sonata?

Hyundai Sonata — Reset “Service Required” Light
  1. Start the engine.
  2. Press and hold the “OK” button located on the top right of the steering wheel for about 3 seconds.

How do you reset the tire pressure light on a Hyundai Sonata?

How to Reset a Hyundai Tire Pressure Monitor
  1. Park the Hyundai on a level surface.
  2. Remove the valve cap of the tire that was indicated as being low on air.
  3. Press the end of the pressure gauge into the nozzle to measure the current air pressure.
  4. Press the end of the compressed air hose into the valve for a few seconds to add air to the tire.

How do you check the oil on a 2016 Hyundai Sonata?

  1. Getting Started.
  2. Open the Hood.
  3. Remove Dipstick. Locate, remove and wipe oil dipstick.
  4. Read Oil Level. Reinsert dipstick, remove and then read oil level.
  5. More Info. Additional information on the oil level. Checking the oil in a Sonata is fairly easy and should be done once a month.

How do you reset the oil light on a 2015 Hyundai Accent?

Perform the following step to reset service light on your Hyundai:
  1. When you turn on the engine and see “Service required” on the screen, press the OK button located at the steering wheel for more than 5 seconds.
  2. Then when the miles and days blink press the OK button for more than 1 second.

How do you reset the service light on a 2013 Hyundai Santa Fe?

Turn the ignition key to position “ON” without starting the engine, If your Hyundai Santa Fe has Smart key button, press the “Start” button twice without touching the brake pedal. Press the MODE button on the steering wheel to highlight the SERVICE menu.

You Might Also Like