Fasten the lap from one end to the other, or from the middle out towards the ends. NEVER fasten from the ends to the middle as this could cause bowing. All LP® SmartSide® products must be installed over a code approved weather-resistive barrier.In this regard, can you use screws on LP SmartSide?
Use minimum 8d (0.113 inch diameter shank), hot-dipped galvanized (ASTM A153 or equal) nails with a 0.270 inch diameter head for 38 Series and 76 Series panels when fastening to wood framing. Do not use electroplated fasteners.
Subsequently, question is, is LP Smart Siding any good? This engineered siding looks and feels like real cedar and provides the same beauty and warmth to houses. Moreover, it offers much better durability and performance. LP® SmartSide provides all the benefits of wood, vinyl, and fiber cement siding along with many other advantages.
Similarly, you may ask, can you face nail LP siding?
For installation with or without nailable sheathing, joints must occur over stud locations. Siding should be installed with top (blind) nailing, with the nails placed a mini- mum of 3/8 in (9.5 mm) from either end. Siding may be face nailed as required.
Is LP SmartSide waterproof?
Tough Protection Against the Elements Next comes a water-resistant, resin-saturated overlay. Together, these treatments give LP SmartSide products protection from heavy rain, high humidity, extreme heat and cold, strong winds and freeze-thaw cycles.
Does LP smart siding need to be painted?
According to the terms of LP's application instructions, all exposed edges of LP® SmartSide® siding and trim must be primed and painted with approved paint to protect the siding substrate. Therefore, do not prime the back side of the siding or trim.How much does it cost to install LP SmartSide?
LP SmartSide cost: $2.00 to $4.00 per square foot for siding and all trim accessories. LP SmartSide installation: $5.00 to $10.00 per square foot. LP SmartSide total cost: $7.00 – 14.00 per square foot.Does LP SmartSide come in colors?
#DidYouKnow LP CanExel is prefinished in 19 colours by Valspar Paint, including two brand new colours for 2016: Barista and Red Fox. Find this Pin and more on Siding by Mark Keiper.What is LP SmartSide lap siding?
Description. LP® SmartSide® products combine the rich cedar-grain texture of traditional wood siding with the advanced performance of treated engineered wood — to help extend its curb appeal for years to come. The beautiful look of real cedar siding with added durability and less maintenance required.Can you stain LP smart siding?
Can I use a traditional transparent or semi-transparent stain on SmartSide products? a. No. These stains are typically low in solids and provide less protection from UV and other weathering effects.How do you paint LP smart siding?
How to Paint LP Smart Siding - Mask off the sections of the siding or trim you wish to leave unpainted, or to leave for another paint color.
- Thin the exterior acrylic with paint thinner.
- Stand with the end of the sprayer 8 inches from the LP Smart Siding surface at a corner area.
- Stop spraying and switch to a paint roller.
Does LP SmartSide need sheathing?
You do NOT need to install OSB or plywood sheathing before installing the LP SmartSide product and racking force from shear wind becomes much less of an issue due to the increased strength of the exterior walls.What is the difference between SmartSide 38 vs 76?
What's the difference between Series 38 and Series 76 Lap Siding? Other than material thickness, one main difference is 38 Series Lap Siding may be installed on studs spaced a maximum of 16 inches o.c. whereas 76 Series Lap Siding may be installed on studs a maximum of 24 inches o.c.Do you caulk LP SmartSide?
If the wood needs to acclimate, or if the weather is wet, the author will install the siding first and caulk the gaps later. All cut ends or rips need to be painted with 100% acrylic latex paint or sealed with caulk.Is LP SmartSide resistant to woodpeckers?
LP® SmartSide® exterior trim and siding is engineered to effectively resist damage from termites and wood boring insects. Insulation is form fit to the back of the panel, which eliminates the voids that exists in traditional vinyl siding and add the impact resistance needed to prevent the woodpecker from pecking.What is LP SmartSide made of?
LP Building Products' SmartSide line of siding and trim is made up of wood strands that are coated with a resin binder and compressed to create a board of superior strength. Each SmartSide piece is also treated using LP's SmartGuard zinc-borate treatment system to protect against termites and rot.How thick is LP smart siding?
LP® SmartSide® Precision Series panel siding is available in 3/8, 7/16 and 19/32 Performance Categories (nominal thicknesses of 9.5, 11 and 15 mm, respectively), 1,220 mm width and in lengths of 2,440, 2,745, and 3,050 mm.How do you clean LP smart siding?
For best results, SmartSide siding should be washed annually to remove dirt and grime, and prevent damage from mildew and mold. Choose the right cleaner. To clean siding, use a solution of water and mild detergent. Wash the surface with a soft brush, sponge or cloth, and rinse off remaining residue with a garden hose.Should you prime the backside of siding?
Back-priming is the process of applying a coat of primer to wood, or siding, to prevent moisture from entering the material. Priming does not completely protect the materials from moisture, but it is extremely important that if you oil the front of the siding, to oil the back of the siding.Can LP SmartSide be used indoors?
Re: LP smartside interior Should work OK. Yes, you would have to caulk around the grooves if it's behind an outlet or baseboard. It has to be painted to protect it from water, but that's not an issue indoors. If water gets to the bottom edge and sits there, it will wick up and ruin it.Can LP Smart Siding be used indoors?
a. Using LP SmartSide in an interior application is acceptable. Please review the material safety data sheet (MSDS) before using the product indoors.What is LP board and batten?
The boards are 4' x 8' sheets of textured LP SmartSide. The battens are 1x2 sticks of trim installed overtop of the boards to hide seams and nail lines. Note: Exterior corners, belly board, and soffit trim must all be installed on a wall section before board and batten. 
