How do you apply crystalline waterproofing?

Installation is straightforward and can be done by any do-it-yourself homeowner.

Step 1 - Clean Concrete Wall Surface.
Step 2 - Repair Concrete Surface.
Step 3 - Wet Surface of Concrete with Water.
Step 4 - Mix Waterproofing Material.
Step 5 - Apply Waterproofing Material to Concrete Wall.

Simply so, what is crystalline waterproofing?

Crystalline waterproofing is a technology that involves the development of crystals to help achieve watertight concrete structures. BASF crystalline waterproofing technology is available as a waterproof coating for concrete, or an integral admixture for concrete, for use in both above and below grade applications.

Subsequently, question is, what is xypex waterproofing? Xypex Concentrate is the most chemically active product within the Xypex Crystalline Waterproofing System. When mixed with water, this light grey powder is applied as a cementitious slurry coat to above-grade or below-grade concrete, either as a single coat or as the first of a two-coat application.

Beside this, how does crystalline waterproofing work?

Crystalline waterproofing systems rely on a technology that turns porous concrete in to an impermeable barrier. The result is a structure with reduced cracking, self-sealing and waterproofing abilities which provides a powerful defense against water damage and corrosion of reinforcing steel.

Is concrete a crystalline?

Concrete as we usually use the term is a mix of aggregates (sand and gravel) and Portland cement. Adding water to the concrete mix starts a series of reactions, producing crystalline calcium silicate hyd Concrete as we usually use the term is a mix of aggregates (sand and gravel) and Portland cement.

What are the types of waterproofing?

Different types of Waterproofing

Areas of Waterproofing is Needed;
Cementitious Waterproofing.
Liquid waterproofing membrane.
Bituminous waterproofing.
Bituminous Coating Waterproofing Method.
Bituminous Membrane Waterproofing Method.
Polyurethane Waterproofing.

What are the materials used for waterproofing?

Commonly used materials for waterproofing in building is cementitious material, bituminous material, liquid waterproofing membrane and polyurethane liquid membrane etc.

What is cementitious waterproofing?

Cementitious waterproofing coatings are breathable, seamless coatings used to provide positive and negative side waterproofing protection on concrete and masonry surfaces. They prevent damage from water infiltration and resist mold and mildew.

What is negative side waterproofing?

Negative side waterproofing is applied to the dry or inside face of the subsurface. It is used primarily for water holding purposes. Negative side waterproofing prevents water from entering occupied space. However, it does not prevent water from entering the substrate.

What is elastomeric waterproofing?

Elastomeric coating is an above-grade exterior wall or roof coating that is approximately 10 times thicker than paint. It forms an incredibly thick yet flexible coating that helps waterproof the exterior of a structure. Elastomeric coatings can be used on walls as well as roofs.

Is there waterproof concrete?

There's only one problem with concrete—it becomes porous as it dries. That means concrete is not waterproof. Brand new cured concrete might be relatively waterproof for a little while, but it doesn't take long at all for water to penetrate the surface and begin to cause deterioration.

What is aquafin?

Description. AQUAFIN-IC (IntegraCoat) is a state-of the art one-component, penetrating cementitious material which waterproofs and protects new or old structurally sound concrete or concrete masonry in-depth. It resists strong hydrostatic pressure and is not a vapor barrier (lets concrete "breathe").

Can you paint over xypex?

Yes. In most circumstances paint, epoxy coatings, cement parge coats, plaster and stucco can be applied over a Xypex coating. For further information concerning the interface of the Xypex coating with paint and other finishing materials, consult with a Xypex Technical Services Representative. Yes.

What is capillary waterproofing?

Capillary Waterproofing. AQUAFIN®-IC (IntegraCoat) is a state-of the art one-component, penetrating cementitious material which waterproofs and protects new or old structurally sound concrete or concrete masonry in-depth. It resists strong hydrostatic pressure and is not a vapor barrier (lets concrete “breathe”).

What is xypex used for?

Xypex is a non-toxic chemical treatment for the waterproofing and protection of concrete. Xypex has a unique ability to generate a non-soluble crystalline formation.

What is crystalline admixture?

Crystalline Admixture. By Concrete Construction Staff. Krystol Internal Membrane (KIM) crystalline admixture offers a waterproofing solution by turning concrete into a water barrier. When combined with water, the chemicals react to form millions of needle-like crystals within the concrete.

What is Penetron admix?

PENETRON ADMIX is a non-toxic, 3rd generation crystalline admixture in powder form that is added to new concrete during batching. PENETRON ADMIX provides projects with waterproof and durable concrete that has the ability to self-heal and seal cracks that develop during the lifetime of the concrete.

How do you use xypex?

Applying Xypex

Apply Xypex with a semi-stiff nylon bristle brush, push broom (for large horizontal surfaces), or specialized spray equipment.
The Xypex coating must be uniformly applied and should be just under 1/16” (1.25 mm) thick.

What is metal oxide waterproofing?

Metal Oxide Waterproofing. impervious waterproofing membranes, coatings, and other materials applied to walls, slabs, decks, and other surfaces subject to hydrostatic pressure or water immersion. boards and coatings, and drainage media integral to dampproofing and waterproofing.

Which cement is best for waterproofing?

Water Repellent Cement is also called Hydrophobic Cement. A small amount of Hydrophobic surfactants such as stearic acid, boric acid or oleic acid is mixed with the ordinary portland cement during grinding of clinker. Hydrophobic Cement is most suitable for basements and for making water tight concrete.

Does adding PVA to cement make it waterproof?

Tip the PVA in the water and mix as normal. The mortar or render is best applied when the PVA is slightly tacky. This gives it the best adhesion and because it has yet to dry and become totally waterproof, will still allow the natural porosity of the surface to assist in drying out the mix you are using.