How do I use trimec 992?

Apply TRIMEC 992 at 2.3 pints in up to 150 gallons of water per acre (1.3 fluid ounces TRIMEC 992 in 5 gallons of water per 1,500 square feet). Do not spray St. Augustinegrass when stressed from heat or drought. Slight turf yellowing should disappear after about one week.

Simply so, when should I spray trimec 992?

Answer: Trimec 992 Broadleaf Herbicide can be sprayed when weeds are actively growing through October before the soil temperatures reach 55 degrees Fahrenheit. Please check out our Cool Season Lawn Schedule for a wonderful guide that shows when to treat your lawn.

Likewise, how long should trimec be applied before rain? 24 hours

Considering this, how do I use trimec?

Spray to wet individual weeds. GENERAL BRUSH CONTROL: For control of brush along roads and other similar noncrop areas, mix 10 to 14 fluid ounces of Trimec® Ready Spray Lawn Weed Killer in 3 gallons of water and apply over 1,000 square feet. Use the higher rate of product for larger plants or more dense brush stands.

How long does trimec take to kill weeds?

Sprayed the yard with Trimec today How long before I start to see results? For some weeds, you will see results within 24 hours. Others might take a day or two.

What temperature should I spray trimec?

around 65-80 degrees

How long does it take trimec to kill dandelions?

There are several formulations of Trimec, but I assume you used the classic amine formulation. If temps hit 60 or above, it should be good after 3 or 4 hours because dandelions are easy to kill.

How long after applying trimec can I mow?

3 days

How long does trimec last?

5 oz per gallon in a 2 gallon pump sprayer. It rained within 24 hours of application and I used no surfactant. To my surprise most of the weeds were dead and gone within 2 weeks.

How much is trimec 992 per acre?

Apply 2.3 pints of Trimec® 992 Broadleaf Herbicide per acre with spray volumes ranging from 40 to 150 gallons per acre. The equivalent application rate would be 1.3 fluid ounces of Trimec® 992 Broadleaf Herbicide in 5.0 gallons of water per 1,500 square feet.

How often can you use trimec?

Answer: Per the product label on Trimec Southern Broadleaf Herbicide the maximum number of applications is limited to 2 per year with a minimum of 30 days between applications. Please be sure you are using the correct usage rate per the product label for you specific application.

How much is trimec a gallon of water?

By combining three broadleaf actives, Trimec is able to handle most any unwanted weed growth excluding only grassy types. WHERE TO USE IT: Fields, fence rows, lawns and just about any where unwanted broadleaf weed growth is active. RATE OF APPLICATION: Use 1 to 1.5 oz per gallon of water per 1000 sq/ft of turf.

Is trimec safe?

Mecoprop is virtually non-toxic to fish and humans. The smallest component of Trimec is dicamba, which is slightly toxic to fish. The carcinogenic effects of dicamba are not well known because of lack of data.

What is the active ingredient in trimec?

Details

Active Ingredient:	2,4-D, dimethylamine salt 25.93%, Dicamba, dimethylamine salt 2.76%, MCPP-P, DMA salt 6.93%
Pet safe:	Yes, if used as directed on label
Formulation:	Professional Product
NOT FOR SALE TO:	CT, MA

Will trimec kill clover?

Trimec® lawn weed killer, by Gordon's®, is a herbicide used to control broadleaf nuisance weeds without harming your lawn. This concentrated herbicide will work on sensitive weeds like clover and dandelion. It is strong enough to eliminate hard to kill weeds like poison ivy and poison oak.

How much is trimec per acre?

Apply 3.0 to 4.0 pints of Trimec· 992 Broadleaf Herbicide per acre with spray volumes ranging from 5 to 220 galions per acre. Or, apply 1.1 to 1.5 fluid ounces of Trimec® 992 Broadleaf Herbicide per 1,000 square feet with spray volumes ranging from 0.5 to 5.0 gallons per 1,000 square feet of turf.

How much herbicide do I need?

Add Herbicide If the label recommends an application rate of 4 ounces of herbicide per gallon of water, then for each gallon of water in the sprayer, add 4 ounces of herbicide. For example, if 4 gallons of water are needed to treat 200 square feet, then you would add 16 ounces of herbicide to the water.

What is trimec used for?

Chemical Action and Usages: Trimec is a selective herbicide for the control of a wide range of broad-leafed weeds including dandelion, plantains, chickweed, clover, henbit, spurge, wild onion and more in established lawns without harming the turf grass.

How do you mix trimec classic broadleaf herbicide?

Mix 1.2 to 1.5 fluid ounces of Trimec® Classic with 6 gallons of water per every 1,000 square feet of coverage. Apply Trimec® Classic during spring or early fall, when weeds are actively growing.

How do you mix trimec Southern?

For broadleaf control, you would mix 0.75 oz Trimec Southern per 1,000 square or approx. 1 gallon water. you would want to mix approx. 1.5 oz with 2 gallons water.

Does trimec kill crabgrass?

Trimec Crabgrass Plus Lawn Weed Killer. Kills broadleaf weeds and crabgrass in one convienient application. Trimec is safe to use on your lawn for getting rid of crabgrass and over 200 troublesome weeds.

What is a 3 way herbicide?

The 3 Way Max Turf and Ornamental Broadleaf Herbicide is a multi purpose post-emergent solution that kills selective broadleaf weeds occurring in home lawns, schools, hospitals, parks, athletic fields, golf courses, sod farms and institutional areas. The 3 way max contains 2, 4-D, Mecoprop-p and Dicamba.