Between the two, white is more rot resistant than red. White oak is much better. I wouldn't use either red or white oak for fence posts. The white oak will last longer, but for the cost of putting up a fence, you might better use pressure treated or locust if it is available.
Correspondingly, what is the best wood for a fence post?
For fence posts, cedar can go several years without rotting; however, they tend to be less durable against soil erosion than pressure treated pine posts. For this reason, it may be a good idea to use pressure treated pine for the posts and cedar for the rest of the fence.
Furthermore, how do you treat oak fence posts? Soak the bottom of the posts in a wood preservative containing copper napthanate, such as Cuprinol. Available at some paint stores and home centers, this wood treatment is specifically designed for in-ground applications. 2. Place about 6 in.
Simply so, what trees make the best fence post?
- Cedar. Cedar is one of the most ascetically pleasing materials for fence posts.
- Locust. Depending on price and availability, locust may be your best choice when selecting wood to build a farm or ranch fence.
- White Oak.
- Whitewoods.
How long will oak fence posts last?
Oak and chestnut products have a durable rating: i.e. last 20+ years with ground contact. Most fencing is softwood: this has a perishable rating, i.e. 2-5 years' life. All good fencing companies should pressure-treat their timber, thereby extending the life to 10 - 15 years.
How do you stop a fence post from rotting?
- Set the wooden fence posts in a cool, dry area with plenty of air circulation so the wood can dry.
- Brush the bottom third or bottom half of the fence post with waterborne copper naphthenate, a wood preservative that is free of arsenic and chromium.
Should I use concrete for fence posts?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.How deep should fence posts be?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).How long will cedar fence posts last?
about 15 to 20 yearsWhat is the best cement for fence posts?
Quikrete 50 lb. Fast-Setting Concrete Mix is a special blend of fast-setting cements, sand and gravel. Designed to set hard in 20-40 minutes. Sets posts without mixing.How long will pressure treated fence posts last?
Most treatment companies claim that when treated, most lumber will last more than 20 years. This holds true for pine and spruce, while cedar may last up to 40 years. Whatever money you spend on buying treated wood, you will more than make up for it in the long run.Which is better cedar or pressure treated wood?
As a general rule, cedar will remain in good condition and require less maintenance than pine if installed above the ground. Pressure-treated pine is less likely to decay if planted in soil, so the posts often last longer.How many rails do I need for a 5 foot fence?
You will have to figure how many boards you need to purchase to 'rip' your custom pickets. It is recommended that you use a minimum of 2 horizontal rails between posts for all fences less than 5' high, 3 rails for fences 5' to 7' high, and 4 rails for 8' high fences.How do you attach a fence to a tree?
Trees and fences should be kept separate when possible.- Lay a 6-inch-by-6-inch post up against the four sides of the tree so that the posts are directly across from each other and flush with the bark.
- Nail or screw the fencing to the 6-inch-by-6-inch post on the side of the tree where the fence will be attached.
